New Zealand trumps Australia on workplace bullying advice

Cover of workplace-bullying NZWorkSafe NZ has released “best practice guidelines” on workplace bullying.  Best practice is a nonsense term but this guide is a major step above similar guides in Australia, in particular.

Definitions

Guides always begin with definitions and the definition New Zealand has applied is the same as that in the recently released Australian workplace bullying guide but with a couple of odd semantic differences.  These variations should not have any effect on organisational changes required to prevent bullying but the variations are curious. Australia describes “unreasonable behaviour” the actions that generate the bullying as:

“…  behaviour that a reasonable person, having considered the circumstances, would see as unreasonable, including behaviour that is victimising, humiliating, intimidating or threatening.”

New Zealand’s definition is:

“…. actions that a reasonable person in the same circumstances would see as unreasonable. It includes victimising,  humiliating, intimidating or threatening a person.”

Is there a difference between actions and behaviours?  

Subscribe to SafetyAtWorkBlog to continue reading.
Subscribe Help
Already a member? Log in here

Missed opportunity for making the business case on safety culture

Cover of HSL culture documentRecently the UK’s Health and Safety Laboratory (HSL) released its second white paper on safety culture.  This paper is called “Making the Case for Culture” and outlines the three arguments for a workplace safety culture – legal, moral and financial – from which a safety business case can be built.  Financial seems to get the most attention but this is perhaps because it is the element that is argued the least and the one that can get the greatest attention from company executives.

The document seems a little thin but it could be put that the simplicity of the presentation in a booklet designed to provide safety culture guidance is an advantage.  It could also be argued that it is primarily a promotional pamphlet for the HSL’s very useful safety climate tool .

Continue reading “Missed opportunity for making the business case on safety culture”

Are you ready for the revised AS1657 on walkways, ladders and platforms?

A guest post by Carl Sachs

Walkwaywas0121-03141MBThe revised Australian Standard AS1657 for fixed ladders, platforms and walkways released in October 2013 plugs some serious holes. Guard rails made of rubber, for example, are now explicitly unacceptable.

While absurd, rubber guard rails technically complied with the 21-year-old AS1657 and the example shows just how sorely an update was needed.

Four big changes to AS1657

The biggest changes to AS1657 concern selection, labelling, guardrail testing and the design of fixed ladders. Continue reading “Are you ready for the revised AS1657 on walkways, ladders and platforms?”

The safety features of the new Polaris set a new benchmark

2014.5-SprtsmnAce4x4-White_f3qThe Weekly Times scored an exclusive this week about a new model of Polaris quad bike which incorporates a roll cage or rollover protection structure (ROPS) in its design.  The significance of the Sportsman Ace is, according to the newspaper and the manufacturer, a “game changer” because it seems to counter the arguments of the quad bike manufacturers against such design changes in submissions to government and in public campaigns.  They have stressed that more effective control of a quad bike comes from driver training and behaviour and that ROPs may itself contribute to driver injuries and deaths.  The Polaris Sportsman Ace, to be released in the United States this week and Australia next month, seems to prove that quad bikes can be redesigned to include safety features, an action that manufacturers have been extremely reluctant to do.

A major critic of ROPs on quad bikes in Australia has been the Federal Chamber of Automotive Industries (FCAI). SafetyAtWorkBlog spoke to a spokesman for the FCAI who explained that the Polaris Sportsman Ace is not an All-Terrain Vehicle (ATV) but a UTV (Utility Terrain Vehicle). Continue reading “The safety features of the new Polaris set a new benchmark”

Media coverage on workplace bullying needs more depth and analysis

The Australian media has given workplace bullying the front page, probably because it is a slow news period and there have been no major disasters this Christmas period. However the coverage is of the new rules and opportunities for assistance offered by changes to the Fair Work Act that commence on 1 January 2014, rather than about prevention.

Most of the comments from the business groups in the article by The Age newspaper will be familiar from the last few months. Generally they object to what they see as red tape and increased regulation. Some also believe that workplace bullying should be handled through human resources rather than as an occupational health and safety (OHS) matter.

Red tape and unnecessary bureaucracy is a legitimate concern but one that, in large part, the business sector has allowed to happen. As discussed previously, much of the red tape originates from the risk management strategy of business where, when an issue or hazard cannot be eliminated or it is too difficult to try, insurance or liability protection is obtained. As others have said, too often the risk management of safety is corrupted to become risk management of legal issues. Continue reading “Media coverage on workplace bullying needs more depth and analysis”

Fair Work Commission girds its loins for workplace bullying complaints

Official statistics on workplace bullying in Australia are notoriously unreliable.  The Productivity Commission estimated the cost of workplace bullying with a huge margin of variation, between A$6 billion and A$36 billion annually.  WorkSafe Victoria has indicated in the past that the number of interventions on workplace bullying is way below the number of workplace bullying complaints.  On 29 October 2103, in a long discussion on workplace bullying the Australian Capital Territory’s Chief Minister, Katy Gallagher stated:

“According to reports from the Commissioner for Public Administration, reports of bullying and harassment have totalled 68 cases in 2010-11, 71 in 2011-12, and 118 cases in the financial year that has just passed, 2012-13. Proven cases of bullying have numbered four, eight 11 and 19 respectively. This amounts to complaints being made by 0.5 per cent of staff, and substantiated in relation to 0.08 per cent of staff.” (Hansard, page P3930, emphasis added)

These latest statistics, in conjunction with those previously reported, indicate that the perception of workplace bullying is much higher than the reality in Australia.   Continue reading “Fair Work Commission girds its loins for workplace bullying complaints”

Lovely chair that helps greatly but is only part of the solution

Figure 4A diagram of  safe posture at modern workstations has become iconic but it has also become a symbol of ergonomic misunderstanding.  There are assumptions behind the angular figure about the way modern workers work, the equipment used and the tasks undertaken.

Too often images, such as the one included here, are taken out of context.  The image is used as a shortcut to what is considered the “correct” way to sit.  The context, the risk assessments, the tasks undertaken, the location of the workstation – basically all of the OHS information included in the workplace safety guides is ignored.  People think “the picture has a tick of approval, so why read when the picture says enough”?

This week Steelcase, a one hundred year old company that originally constructed waste paper baskets, launched its Gesture chair.  The marketing of this chair is based on the discovery (?) of nine new postures in the workplace:

Continue reading “Lovely chair that helps greatly but is only part of the solution”

Concatenate Web Development
© Designed and developed by Concatenate Aust Pty Ltd