New OHS info on Working Alone and Occupational Violence

One of the most difficult safety management challenges is the control of hazards associated with working alone.  The most effective control is to not work alone, but the difficulty comes because this option requires expenditure.

WorkSafe Victoria recently released an information sheet on this hazard and listed the following hazard control options:

  • Buddy system
  • Environmental design
  • Communication or location systems
  • Alarms
  • Movement records
  • Training
  • Knowledge sharing

WorkSafe wisely says that most workplaces will require a combination of these options to control the hazard of working alone.

Trying to reduce the hazards of working alone is a terrific indication of the economic health of a business, the level of safety commitment of a business owner or manager, and the state of safety knowledge in the company. Continue reading “New OHS info on Working Alone and Occupational Violence”

The Commercial Kitchens Campaign needs further examination

Why is a government workers’ compensation agency promoting first aid when a different agency has had that role for over twenty years?  And why do the program’s first aid kits contain commercial products that are no more effective in the first aid treatment of burns than water from the tap?

On May 12 2011, WorkCover SA launched, in conjunction with the Julian Burton Burns Trust, the Commercial Kitchens Campaign.  Burns are a major feature of this campaign with 500 Commercial Kitchens Burns Packs being distributed free to restaurants and cafes in South Australia.

SafetyAtWorkBlog has been told that these kits contain a Burns First Aid Kit developed by A/Prof John Greenwood, the Julian Burton Burns Trust and St John Ambulance Australia which includes the following items:

  • burnaid gel
  • burnaid dressing,
  • a plastic sheet,
  • sterile towel,
  • tape, and
  • step by step directions written by A/Prof John Greenwood.

The odd thing about this initiative is that medical research has shown that burnaid gels are less effective than cool running water for the first aid treatment of burns.  In the journal Wound Practice and Research (Vol 18 Number 1 – Feb 2010) Australian researchers Leila Cuttle and Roy M Kimble wrote in “First Aid treatment of burn injuries” that

“The widespread use of such dressings [Burnaid is specifically referenced] (which have now even penetrated the first aid market) is alarming considering the lack of studies which support their use.” Continue reading “The Commercial Kitchens Campaign needs further examination”

TV report into SafeWorkSA’s performance

On 20 May 2010, the Australian Broadcasting Corporation televised a story on the South Australian 7.30 program about the supposedly poor investigative performance of SafeWorkSA.  The article was framed by a mother’s grief, the grief of Andrea Madeley over the loss of her son, Daniel.

The story was some weeks coming as the story’s production began around the time the ABC were filming at the Workers’ Memorial service in Adelaide a month ago.  The story promised to be a hard-hitting criticism of the State’s OHS regulator but the latest Industrial Relations Minister, Patrick Conlon, handled himself well and what could have provided a provocative national context to the story, the harmonisation of OHS laws, dampened the impact.

Both Yossi Berger and I have written about the findings of Coroner Mark Johns on this blog.  Yossi agrees that OHS regulators are almost all too slow to implement control measures to prevent recurrences of injuries and death,  I thought the Coroner was poorly informed.

The lasting image of the 7.30 storywas the young boy talking at Adelaide’s memorial about his loss of a relative – the way he kept talking while he sobbed and cried.

All OHS regulators must improve their game in empowering employers and workers to prevent injury and death.  Coronial criticisms are unlikely to affect changes in safety management by themselves.  Crying boys are also unlikely to affect lasting change, but it is almost a certainty that the harmonisation of OHS laws will change very little.

Kevin Jones

Quad bike manufacturers walk out of safety working group

In early 2010, Australia’s Heads of Workplace Safety Authorities (HWSA) established a trans-Tasman working party to look at the safety issues of quad bikes, often called all-terrain vehicles.  The working group is in the final stages of its report and a major motorcycle industry representative has not liked the findings and has apparently withdrawn from the working group.  A report on the increasing tensions was published in  this week’s The Weekly Times.  SafetyAtWorkBlog has been told that the quad bike industry representative has walked out in protest.

Let’s look at what HWSA said about the working group in May 2010:

“HWSA Chair, John Watson, said every farming fatality leads to immeasurable suffering in close-knit rural communities and these figures are not acceptable.
“The working group is expected to deliver solutions to safety problems associated with use of quad bikes on farm properties and raise awareness of practical risk controls,…
“The group will look at issues that include design, safety equipment, training and instruction, aftermarket accessories, safe use and point of sale,….
“The joint program of work will be delivered through an Industry Solutions Program where industry and regulators work together to address high risk safety issues – an initiative that has successfully provided practical solutions to a number of issues across many industries.
“The working group is focused on producing tangible and sustainable safety outcomes across the farming and agricultural industry where quad bikes are commonly used….”
Of significance in that media release is that Chief Executive of the Federal Chamber of Automotive Industries (FCAI) Andrew McKellar said

“It is our objective that all quad bike users are well informed of the manufacturer’s recommendations in relation to the safe use of these vehicles…”

The sticking point in the working group was, according to The Weekly Times, that

“”…the committee was expected to back the recommendation to “consider fitting an anti-crush device”, the strongest position yet for roll-over protection.”

The committee did recommend this and apparently the FCAI walked.  Attempts have been made to contact the FCAI to confirm their action and their objections. Continue reading “Quad bike manufacturers walk out of safety working group”

Compliance or Confidence?

A reader has been inspired by recent articles discussing OHS compliance to contribute their own article on some of the issues raised:

“Compliance”, while being a way forward in OHS, misses the mark. We should ask the question: Why do regulators want compliance anyway?

Compliance, or conformance as is alternatively used, is a means to an end. Not an end in itself. In haste to improve the world via compliance we sometimes forget that.

Compliance presumes that rules laid down by regulators are a “good enough” way to achieve safety. Compliance’s foundation is the minimum-standard. Foundations cannot be anything like the maximum-standard because best practice regulation knowledge backs up our common sense that maximum standards would be bad and expensive. But wouldn’t it be comforting to be able to encourage and get more than just the minimum?

Some who have felt the stick end of compliance might think some regulators believe their rules and guides are the only path to safety. But the fact is that even the best codes & regulations have flaws; they do change. Furthermore, exemptions get provided, position papers and codes of practice get written to fill the gaps. And they get re-written. Sometimes the reasons for a rule are lost in time. Shamefully, sometimes valid reasons never existed. Sometimes rules are written to serve the purposes of some over others or to empower authority. We can know this because COAG and the OBPR have to warn against it. Continue reading “Compliance or Confidence?”

Regulating The Great Leap Forward (Into The Bleeding Obvious)

Col Finnie has provided the following article in response to OHS compliance checklists:

It’s gotta be time to bite-the-bullet.  The wish-fulfilment approach – that people will apply some sort of system to how they look after safety because that’s the only sensible way to do it – well, that’s not working, particularly it seems, in the small business area.

Time to regulate for the obligation to have something that can, at very least, lay the foundation for a comprehensive systematic approach.  Seems just a bit whacked to me that a demonstrable systematic approach is required once a worker is injured (with the return-to-work obligations) and yet there is nuthin’ for the prevention stuff.

Getting a slapping from a magistrate for having no safe work procedures (as one part of a systematic approach) would work as an incentive if people were busted as often as they are for road traffic naughtiness; but we know that frequency of OHS busts are just not going to happen.

The Great Leap Forward (Into The Bleeding Obvious) would have to be regulated in a smart way.   Continue reading “Regulating The Great Leap Forward (Into The Bleeding Obvious)”

Forklift incidents continue

One of the the most hazardous pieces of equipment in modern workplaces is the forklift.  Sadly it is also one of the most useful.  A recent prosecution in Western Australia provides an example of many of the serious risks in using forklifts:

  • untrained or undertrained drivers
  • unsafe decisions by employers
  • the safety role of seatbelts
  • labour hire management and staff supervision
  • driving with forks elevated
  • training certification.

Other related issues are the employment of

  • transient labour, and
  • young workers.

According to a WorkSafe WA media release, the basic facts of the incident are

Flexi Staff supplied two casual labourers to the Beds Plus warehouse in Kewdale in February, 2008. The two men were British citizens on a working holiday in Australia. [links added]

It was not part of their labouring job to operate forklifts, and neither had any experience or qualifications or High Risk Work licences. Continue reading “Forklift incidents continue”

Concatenate Web Development
© Designed and developed by Concatenate Aust Pty Ltd