Role of OHS Inspectors

There have been several incidents recently that illustrate the unenviable pressures on inspectors and Australian OHS regulators.

The Tasmanian Coroner found that the mining inspectorate of Workplace Standards Tasmania was “inadequate” and incapable of  “of carrying out its core function of inspecting and enforcing best safety practices within the mining industry.”  Two inspectors for that State’s mining sector- a sector that in 2007/08 was 621 mining leases strong, according to the Annual Report of Mineral Resources Tasmania.

The construction union (CFMEU) in Victoria was highly critical of WorkSafe Victoria following a scaffolding collapse in a main street of the suburb, Prahran.  A similar event occurred in Sydney a couple of days later.

However, OHS legislation clearly states the employer is responsible for safety in workplaces, as WorkSafe reiterated in a press statement.  TV an press reports did not quote the construction union official criticising the construction company or project manager for having the scaffold collapse on their worksite.

(The CFMEU provides a scaffolding checklist on its website.)

In the scaffolding situation a union criticising the OHS regulator is a peculiar distraction from the obvious failure of the organisation that has control of the worksite, the employer.  In the Beaconsfield case, the distraction is just as effective and allows the employer to feel that less attention, less criticism, equates to the incident or the fatality being considered of a lesser significance.

The days of government certification for scaffolding, boilers & Pressure vessels, and a raft of other work items disappeared almost twenty years ago in many Australian States.  One of the reasons this occurred was that regulators realised that by certifying something, by granting official approval, the regulator took on some of the responsibility for the work item.  Most regulators, with government support, realised that it was in their interest to re-emphasise the employers’ legislative obligations that had existed in law for some time.

One does not need to physically visit worksites to encourage “best practice”.  No inspectorate would expect every workplace to be visited by inspectors but high-risk workplaces, such as mines, may have this expectation.  

It seems increasingly popular for the OHS inspectorate to be called in early on high hazard organisations (HHO) projects. (HHO is a concept most recently discussed by Jan Hayes and discussed elsewhere in the works of  Professor Andrew Hopkins)  This enables projects to meet high safety standards in the planning stage.

OHS regulators have a delicate balancing act between consultation and enforcement.  This is a balance that is constantly being tweaked as political, economic and social pressures fluctuate.  The process is not helped b y fingers being pointed in the wrong directions.

Kevin Jones

[NOTE:Professor Michael Quinlan  of  UNSW, Middlesex University and University of Sydney) will be a keynote speaker at the upcoming   Safety in Action 2009 Conference on 2 April 2009 concerning the results of a five-year research report into what OHS Inspectors do and the implications for employers and safety professionals.]

3 thoughts on “Role of OHS Inspectors”

  1. Hi Kevin

    \”un-Reason-ables\” that\’s a good one! Frankly I do admire Reason\’s work, and I have purchased his latest book, but I won\’t consider myself a fanatic of his work.

    I have not thought deeply enough to be considered a \”second-wave\”. However, having been an inspector and investigator (not in Australia), I think one of the critical success factors of modern OHS regulators is the ability to identify hot spots and act on them proactively. This means having the capacity to understand the challenges that the different industries are facing and preempt possible incidents.

    This leads to the next question, \”what indicators should OHS regulators use to facilitate resource allocation?\” I believe most regulators fall back onto complaints and accident reports, but these are lagging indicators. There\’s a need for leading indicators at industry and national level. Anyone that comes up with reliable leading indicators at these levels, will be the next James Reason…

    As for Reason\’s book, I like your suggestion, it might help him hit the top ten book list!

    Yang

  2. Yang

    Thanks for the complement. Please pass the word around about the blog and keep commenting.

    James Reason is a fascinating study in \”niche celebrity\” and has had an enormous impact in a technical area. In fact there are some who I would consider fanatics on his ideals (the \”un-Reason-ables\”?)

    As with many new ideas, I often think that the most useful information comes from the second-wave of thinkers – the analysers and the expanders. I haven\’t seen much of the second-wave of Reason-ites yet. If you have any suggestions please share.

    Do you think Reason would have a broader readership if he called his book \”Who Stole my Swiss Cheese?\”?

  3. Firstly, I must say that this is the most useful and active safety blog that I know of. Well done Kevin!

    Secondly, I would like to share what I read in James Reason\’s book on organisational accident (1997). He has a chapter on OSH regulators. Reason highlighted the unenviable position that regulators are in. Most regulators are surviving on bare minimum number of inspectors, but at the same time it is now common for major accident inquiries to pinpoint regulator deficiencies as contributory causes of the accidents. In another words, regulators are expected to do more, but they are not given the resources to do so.

    Reason\’s view is clearly illustrated in the recent Beaconsfield Coroner\’s inquiry report.

    Yang

Leave a Reply to Kevin Jones Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Concatenate Web Development
© Designed and developed by Concatenate Aust Pty Ltd